
From strip-out to first hot shower, plumbing, tanking, tiling, electrics and finishes handled in the right order by one team, on a written completion date.
Public liability & contract works cover on every project.
Y Elite Constructions Ltd · Company No. 14059433.
Every job backed by a 12-month written workmanship guarantee.
Free itemised on-site quotation, no vague ballpark figures.
Structural work signed off by independent Building Control.
A snapshot of recent builds across Leeds and West Yorkshire, from extensions and loft conversions to kitchens, roofing and full interior finishes.









A bathroom renovation is a full-room refit: strip existing suite, upgrade plumbing and electrics, tank walls and floor to waterproof standard, tile, install new suite (bath, shower, WC, basin), fit heated towel rail and lighting, and hand over ready to use. Common variants include family bathrooms, en-suites, wet rooms, and cloakrooms.
Homeowners in Leeds with a bathroom that's tired, tiled to the ceiling in 1990s beige, or has a shower that's been on the point of failing for months. Also new-build owners upgrading builder-spec bathrooms to something worth having.
When you're planning to sell within 5 years (a good bathroom pays back), when the current suite is genuinely failing (silicone black, grout cracked, shower leaking), or as part of a loft conversion or extension adding an en-suite.
Bathrooms are the highest-water-risk room in the house, one leak takes out a ceiling below. Cheap tiling on unprotected substrate leaks within a year. Under-specified extractors condensate the ceiling. Wrongly graded shower trays flood the joists. Doing it once, waterproofed properly, is dramatically cheaper than doing it twice.
Bathroom failures are almost never the tile or the suite, they're the invisible layer underneath.
We visit, measure, discuss layout options (bath vs walk-in shower, wet room feasibility, storage needs), and advise on plumbing constraints: pressure, waste routing, hot water capacity.
Every item itemised: suite, tiles, taps, shower, screens, extractor, lighting, waste, plumbing, tanking, plaster, labour. Fixed price, dated programme.
Existing bathroom out, new copper or PEX plumbing runs, waste re-graded if needed, new dedicated electrical circuits, extractor duct routed externally. Plaster to skim finish where required.
Full tanking membrane to wet zones and floor. Precision tiling with matching-grout finish. Suite fitted, shower commissioned, silicone finished, lighting tested.
Full flow and drainage test, all warranties handed over, snag list walked and resolved. 12-month written workmanship guarantee provided.
Full tanking membrane in every wet zone, not a hope that the tile grout will hold water for 20 years.
Correctly sized fan ducted externally through the wall or roof, no loft condensation, no mould.
Thermostatic mixer matched to your boiler's flow and pressure so a flushed toilet doesn't change the shower temperature.
Every valve reachable behind an access panel, future repairs are minutes, not days.
Sanitary-grade mildew-resistant silicone, cut and finished neatly: no black mould appearing in six months.
We fit reputable British and European brands with meaningful manufacturer warranties on suites, taps, showers and screens.
Bathrooms vary massively in complexity, a straight suite swap is very different from a full wet-room conversion. The right specification depends on the space, the plumbing and how the room will be used.
The classic upgrade, bath with over-bath shower and screen, WC, basin, heated towel rail, ceramic tile to ceiling in the wet zone, half-height around the rest. Typically 5–10 working days on site. The single most common bathroom job we do in Leeds.
Usually a compact walk-in shower, WC and basin: often installed as part of a loft conversion, extension or master bedroom upgrade. Requires careful attention to waste routing (soil stack access), hot water capacity, and extractor ducting through the roof or external wall.
The most technically demanding bathroom build, no shower tray, the entire floor is the shower zone with a linear drain. Requires a properly graded tanked floor (typically 1:80 fall to the drain), full-height wall tanking, and a solid subfloor capable of taking tile weight. Very worthwhile in en-suites and family bathrooms for maximum accessibility and a hotel finish.
Adding a downstairs WC is one of the highest-return renovations by cost, typically £3,500–£6,500 including plumbing, plaster and finishes. Space requirement is smaller than most homeowners assume (~1.5m²). Waste routing to the existing soil stack is the main constraint.
We plumb in copper or high-quality push-fit PEX to modern standard, with isolation valves at every appliance behind removable access panels. Waste pipes graded correctly (1:40 minimum) and vented. Boiler flow rate checked against new shower and bath fill requirements, cold-shower-when-toilet-flushes is prevented at design stage, not fought with a thermostatic valve after the fact.
Wet zones fully tanked with a proprietary liquid-applied or sheet membrane before any tiling. Cement-board substrate on stud walls in shower areas, never plasterboard alone. Full-body porcelain tiles for durability. Epoxy grout in the highest-water zones for the longest lifespan.
A full family bathroom refit typically costs £6,500–£12,000 including suite, tiling, plumbing, electrics and labour. En-suites £4,500–£9,000. Wet rooms £8,500–£16,000. Downstairs WCs £3,500–£6,500. Fixed itemised quotation provided free.
Most family bathrooms are 5–10 working days on site. Wet rooms 8–12 days. En-suites 4–8 days. You'll have a written programme so you know when the shower is back on.
No, the room is out of commission for the duration. Most clients with only one bathroom plan the works when they can use a family member's or install a temporary toilet in the utility. Two-bathroom households simply use the other.
We tile in-house, walls, floors, wet rooms, mosaic, large format. All done by the same team so there's no handover gap between plumbing and tiling.
Yes, many clients supply their own from Victoria Plum, B&Q, Wren or independent showrooms. We'll check the specification before you order to make sure everything is compatible with the plumbing.
A properly installed bathroom should last 15–25 years cosmetically, and 30+ years functionally. Silicone typically needs replacing every 8–10 years; grout can be regrouted rather than retiled.
For a like-for-like refit, usually no. For adding a bathroom in a new location (e.g. en-suite in a loft or extension), yes, for electrics (Part P), ventilation (Part F) and drainage (Part H). We handle notification.
Yes, Y Elite Constructions Ltd holds full public liability and contract works insurance covering water damage caused during installation. Certificates available on request.
Yes, wet rooms are ideal for accessibility, and we design with future-proofing in mind (grab-rail noggins, level threshold, seat-friendly showers) even if it's not needed today.
Free on-site consultation. Written specification. Fixed price with a dated completion. No pressure, no obligation, and no vague ballpark figures.